辰龙游戏游戏平台

胶水|快干胶|UV胶|瞬间胶|ab胶|厌氧胶|深圳胶水批发生产厂家

Welcome to the official website of Ronghui Rubber Industry! 快干胶 | UV胶 | AB胶 | 瞬间胶 | 厌氧胶 | 深圳胶水 Hot search: quick-drying glue | UV glue | AB glue | instant glue | anaerobic glue | Shenzhen glue


Ronghui Contact

荣晖胶业联系方式

Shenzhen Ronghui Adhesive Products Co., Ltd.

Consulting Hotline: 13808852107

Company phone: 0755-29002500

Consulting QQ: 330276391

Enterprise email: szrhuvj@126.com

Company Address: Longhua New District, Shenzhen, Guangdong

Dalang South Road, Laowei Second Industrial Zone

深圳市荣晖胶粘制品有限公司

news

Summary of the use of UV glue
Release time: 2016-08-22 Browse: Author: Rong Hui Xiao Bian Source: glue Frequently Asked Questions

How to use UV glue

Looking for the use of UV glue in Baidu, all of a sudden come out in a lot of opinions, there are all kinds of opinions, but there are not many comprehensive, only the Baidu experience is still like that! After all, UV glue is a chemical product, and it can be said to be a more rigorous issue. Therefore, based on many years of experience, the editor has also summarized some UV glue use methods for your reference:

First we have to prepare some necessary materials, acetone, which is used to clean the surface. We will introduce them in detail later, as well as UV glue, UV lamps, blades, wet paper towels, and white knitted cotton fabrics. Only sufficient preparations are made. In order to get the glue glued, this is called not fighting unprepared battles. After preparing the above materials, let's see how we should operate: uv胶水的使用方法大全图解A

Using method A, no matter what kind of glue is applied, we need to treat the surface, because some products have dirty things on the surface, some products have oily things, etc. If you do n’t clean it, the performance of UV glue will be It ’s greatly discounted, so you have to deal with it according to the specific materials. In general, use the needle and cotton cloth we prepared before to take up the acetone we prepared before to clean the surface, because acetone is relatively strong in decontamination and the surface is dry. In comparison, after cleaning, our products have no weak borders. In this way, the glue can be completely spread and the performance of the UV glue can be exerted to the maximum extent possible. uv胶水的使用方法大全图解B

Use method B. After the surface is cleaned, prepare to start applying UV glue, but make sure that the surface of the product is clean and dry. Continuously apply UV glue according to the requirements of the product, and do not disperse, depending on the process required by the product. Determine the amount of UV glue. If it is a product in the form of a buckle, only a small amount of UV glue can be used. If it is a sticky product, it must be thinly applied. But remember that it cannot be applied. It is too thick. First, it is afraid that the UV glue cannot be completely cured due to insufficient curing time or insufficient light intensity during curing, which affects the performance of the UV glue. Second, there is such a secret in the glue industry that the glue is too much and not sticky. But everyone in the industry knows this. uv光固化定位

Use method C. After the UV glue is finished, we need to start positioning with UV curing equipment. Of course, the material we prepared today is UV lamp. Let ’s talk about the method of UV lamp. In the industry, we call light positioning. The position of the glue is used for short-time low-radiation light curing. In general, the UV curing lamps we commonly use are ultraviolet lamps and mercury lamps. Depending on the power, the curing time is different. Keep in mind when curing, Human eyes should not look at the light, because ultraviolet light has high radiation and is very harmful to human eyes. When curing with a UV lamp, be sure to shine on the side where the glue is applied. Depending on the amount of glue applied to the product, it ranges from a few seconds to tens of seconds. Of course, it has a lot to do with the quality of the glue, which is convenient because of time Not much to say here. 用针织棉布料清理多余的溢胶。

Using method D, if our product is relatively large, we will inevitably apply more when applying glue. If the leveling of the glue is relatively good, it will definitely flow out. At this time, we will do the cleaning work and put the extra UV. The common method for cleaning the glue is to scrape it with a knife. If some UV glue is thin and then it is not obvious, then if you use a small blade, you are afraid of scratching the product, then we must use a soft cloth to soften it. You can use acetone alcohol to clean the first knit, and then gently wipe the fine ground with a paper towel. uv胶固化后测试

Use method E. After the extra UV glue is cleaned, we need the UV glue to be completely cured. Generally, it depends on the product. If some products cannot be cured for a long time, special treatment is needed because the curing lamp is cured inside. The temperature is estimated to be around 60-80 degrees. If it is cured with high radiation for a long time, the heat resistance of the product must be considered.

Using method F, the last thing is to do a simple cleaning of the surface. uv胶厂家提醒您注意事项

Of course, the above are all methods for testing a single product. If you need large-scale production, you can test some of the above data, and then use a notebook to record those data in preparation for large-scale products. Use, for example, the curing time, the thickness of the glue, how to apply the glue faster and faster, and so on.

Warm reminder: If this product is stored at 8-18 ℃, it will be more ideal. In most cases, the UV glue we use will be left. At this time, we can store the UV glue if conditions allow. In the environment of 8-18 ℃, because of this, the shelf life of UV glue will be much longer than normal temperature. In order to avoid the viscosity of UV glue falling, we must not return unused UV glue to the original packaging bottle. Store separately.

Ronghui Plastic Industry reminds you that the above instructions are for reference only. The specific operation requires customers to make appropriate adjustments according to the specific situation. If you still have UV glue , please call our 24-hour customer service hotline 13808852107 to answer professionally.














I guess you'll like

快干胶 瞬间胶水 电子uv胶水 水晶ab胶

Shenzhen Ronghui Adhesive Products Co., Ltd. All rights reserved 粤 ICP 备 16060607 号

 

Company phone: 0755-29002500 Mobile phone: 13808852107 Email: szrhuvj@126.com

 

Enterprise official website: b-yeah.com

 

Address: Laowei Second Industrial Zone, Dalang South Road, Longhua New District, Shenzhen, Guangdong

 

胶水 | 快干胶 | UV胶 | 瞬间胶 | ab胶 | 厌氧胶 | 深圳胶水批发生产厂家 Popular searches: glue | quick-drying glue | UV glue | instant glue | ab glue | anaerobic glue | Shenzhen glue wholesale manufacturers

<script>
  (function () {
     var bp = document.createElement ('script');
     var curProtocol = window.location.protocol.split (':') [0];
     if (curProtocol === 'https') {
         bp.src = 'http://zz.bdstatic.com/linksubmit/push.js';        
     }
     else {
         bp.src = 'http://push.zhanzhang.baidu.com/push.js';
     }
     var s = document.getElementsByTagName ("script") [0];
     s.parentNode.insertBefore (bp, s);
 }) ();
 </ script> 
赌坊娱乐真人平台 pc赌博下载在线网址 赌钱下载电脑端 博猫彩票开户登录 燕赵福利彩票 江苏快三官网1分钟快三 诈金花游戏赢现金 重庆福彩欢乐生肖玩法 万博app投注开户 闽南棋牌